FC-FLBD-en – شرکت صنعتی فن ایران

Model FC-FLBD

In these systems, the connection of the impeller to the motor is indirectly and via a pulley-belt mechanism.
The design of these types of fans is based on the impeller method, both with the impeller between bearings and overhung impeller, according to the AMCA standard.
The airflow capacity is up to approximately 250,000 cubic meters per hour.
The static pressure is up to approximately 700 pascals.
The diameter of the fan impeller reaches up to 1250 millimeters.
The inlet airflow can be adjusted with a damper or by changing the frequency of the speed.
These series of fans can perform adequately in temperatures ranging from -40 to 500 degrees Celsius.
The position of the outlet relative to the inlet and its angle concerning the horizon will be selectable according to the AMCA standard.
The capability of installing any accessories such as dampers, silencers, bird screens, chassis, etc., on these air movers exists.
The vibration balance of these fans is according to the ISO standard DIN ISO 1940-1 grade G 6.3 <4 mm/s.

In environments with high corrosion and acidity, stainless steel 304 or stainless steel 316 materials are used for the body and impeller of the fans (stainless-steel Fans).
In the presence of flammable gases and dust in the fan environment, to prevent sparks and explosions, the fan is fully isolated from the surrounding environment, and also a layer of copper or composite insulation is used on the potential collision area of the two metals, the impeller and the body of the fan (Explosion & Spark proof Fans).
In the oil, gas, and petrochemical industries, centrifugal fans are designed and manufactured according to the international standards API 560 & API 673.